保定隔离墩模具厂家

隔离墩模具作用： 1.隔离墩模具可以用来生产隔离设施,而隔离墩是用来分隔同向行驶的机动车和非机动车交通流,常设置在机动车与非机动车分界线上。

Isolation pier mold function: 1. isolation piers die can be used to produce isolation facilities, and isolation piers are used to separate the traffic flow of motor vehicles and non motor vehicles running in the same direction, often set on the demarcation line of motor vehicles and non motor vehicles.

2.机非隔离设施主要采用两种形式:绿化分隔带和隔离护栏。

2. there are mainly two types of non isolation facilities: Greening dividers and isolation guardrail.

3.同一道路上应设置统一样式的机非隔离设施。

3. on the same road, there should be a unified mode of non aircraft isolation facilities.

4.道路断面中,非机动车与机动车位于同一平面时,且非机动车车道宽度为1.3cm以上可以设置机非隔离设施。

4. in the road section, when the non motor vehicle and the vehicle are in the same plane, and the width of the non motor vehicle lane is above 1.3cm, a non aircraft isolation facility can be set up.

5.在道路断面中,非机动车与行人于同一平面时,机非隔离设施可参照人行道隔离设施进行设置。

5. in the road section, when the non motor vehicle and pedestrians are in the same plane, the non isolation facilities can be set up according to the sidewalk isolation facilities.