| 高速隔离墩模具工艺 |
| 添加时间：2019/2/22 11:53:07 浏览次数： |
| 高速隔离墩模具工艺 公路隔离墩模具批发 高速隔离墩钢模具的保养也要特别的注意，对于不同的季节，其操作也是有所不同的,因此要特别注意不同季节进行不同的生产计划调整。在夏天比较热的时候，脱模的周期会变短,隔离墩钢模具一天生产两次左右，加上钢模具的边角都有缝隙水流失的比较快，所以提高了生产的速度。冬季寒冷的季节，放置在室内仓库中，防止模具爆裂冻住，拆模的时候就麻烦了。 High speed isolation pier mold technology highway isolation pier mold wholesale high-speed isolation pier steel mold maintenance should also be paid special attention, for different seasons, its operation is also different, so special attention should be paid to different seasons for different production planning adjustment. When the summer is hot, the period of the mold release will be shorter, the steel die of the isolation pier is produced two times a day, and the edge angle of the steel die is faster, so the production speed is improved. The winter cold season is placed in the indoor warehouse to prevent the mold from bursting and freezing. 高速隔离墩模具脱模包含了很多技巧： High speed isolation pier mold demoulding includes many skills: 1、水泥的强度，混凝土的配比要得当； 1, the strength of cement, the ratio of concrete should be appropriate; 2、混凝土的风干时间要掌握好，一般为24小时； 2. The air drying time of concrete should be well controlled, usually 24 hours. 3、高速隔离墩模具工艺 公路隔离墩模具批发 隔离墩钢模具使用前，先在内模喷一层脱模剂或汽油，可防止粘膜。 3, high speed isolation pier mold process highway isolation pier mold wholesale isolation pier steel mold before use, the first injection of a mold release agent or gasoline, can prevent mucous membrane. |
| 上一页 道路专用滚塑隔离墩 |
| 下一页 高速隔离墩的好处 |
Copyright © 技术支持：遨游网络